A visual inspection is an initial action in determining mold issues as well as possible contamination problems. Visual examination in mix with air, swab, as well as tape tasting will make certain the examiner will be able to figure out the source of the contamination issue as well as remediate it.

Contact Us »

If mold exists, the underlying cause of the water damage must be corrected.

Get an expert to inspect for mold - Available now!

Request Inspection


We understand that you need to get rid of the mold danger, not add to it. No job is also small or too large and also we provide our solutions to both commercial as well as property customers, consisting of homeowners, proprietors, institutions, hotels: any kind of residential or commercial property.


Request A Mold Abatement

Learn More >     Contact Us >



There are literally thousands of types of mold in the environment. The good news is that over the centuries, molds have helped produce some wonderful inventions such as penicillin, breads, cheese, and particular alcoholic beverages. The bad news is that molds reproduce by sending out spores. These spores activate and grow when they land on a moist spot. Mold abatement Mustang ridge Texas

The mold spreads as well as spreads. Outside this is not necessarily a poor scenario due to the fact that mold is part of the all-natural process of decay.

Mold when left unremediated, can create a solid musty smell, have a fuzzy look, and be mushy in appearance. Not an attractive sight.

Air Sampling - Mold abatement

The objective of air sampling is to figure out the type and quantity of airborne impurities present. Air sampling is performed when the visibility of mold is suspicious, due to musty odors and allergic reactions yet can not be established through the visual evaluation. Air tasting is done on both the exterior as well as indoor air for a comparison to identify where troubles exist or come from. The interior sample is taken when the A/C or heater are in operation to guarantee a accurate and effective examination.

Tape/Swab Sampling - Mold abatement

Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.

Why hire us to eliminate the mold?

Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Texas  Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.

Hidden Mold

The anxiety of concealed mold gives rise to visions of mold remediation specialists traipsing around inside specialized enclosures while demolishing your residence at remarkable cost to you. If you have actually seen moldy odors or water damages, maybe it is time to talk to a mold professional. Nevertheless, for the large majority of house owners who have actually not seen the signs and symptoms of mold development, currently is the ideal time to start looking.

A lot of recognize with Stachybotrys, the "toxic black mold", which is common to water harmed gypsum wallboard. This mold microorganism calls for high dampness schedule, known as water task, to create. Optimum development is attained at.98 water task, which is a great deal of wetness. Large black spots, powerful odor, as well as lots of water, usually make this mold hard to miss out on. The actual danger of hidden mold is the ability for a little mold trouble to turn into a big and expensive one before being observed. Wallpaper can aid make that feasible.

Any type of large surfaced product or therapy included to a wall, such as shelfs, paint or wallpaper, can change the vapor as well as thermal performance of a wall surface. A well developed wall surface will slow down the progression of dampness with the wall surface and yet allow it to pass through prior to trapping too much dampness and also running into psychrometric conditions that would allow condensation. The barrier additionally makes possible a greater water activity in the underlying wallboard that leads to hidden mold development.
It's time to identify to what level the mold has actually developed as soon as you have discovered that you have concealed mold. Figuring out the moisture resource or psychrometric stimulant is paramount in approximating the dimension of the broken location. You might find that the damages is little and also restricted to an area around a leaking home window, air conditioning unit or connected with a vent blowing chilly air straight on the location.

Contact • Mold Inspection

Are You Ready To Eliminate The Mold • Mold abatement?

Connect with one of our team experts

Start Today!

Contact Us

Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible. To ensure that we could much better aid you, please note that areas noted with an asterisk needs to be filled out.

Call at (512) 931-3245


Phone: (512) 931-3245

Proudly Servicing Texas Local Areas

Austin • Barton Creek • Bear Creek • Bee Cave • Brushy Creek • Buda • Cedar Park • Creedmoor • Driftwood • Garfield • Hays • Hornsby Bend • Hudson Bend • Hutto • Jollyville • Jonestown • Lago Vista • Lakeway • Leander • Lost Creek • Manchaca • Manor • Mountain City • Mustang Ridge • Pflugerville • Point Venture • Rollingwood • Round Rock • San Leanna • Shady Hollow • Sunset Valley • The Hills • Volente • Webberville • Wells Branch • West Lake Hills • Wyldwood