A visual inspection is an initial step in recognizing mold issues and possible contamination problems. During the procedure, water leaks, and also wetness stains within the house will certainly be recognized. A/c, furnace, and also crawl rooms will additionally obtain assessment. Aesthetic inspection in combination with air, swab, as well as tape sampling will certainly make certain the assessor will be able to establish the source of the contamination issue and remediate it.

Contact Us »

If mold exists, the underlying cause of the water damage must be corrected.

Get an expert to inspect for mold - Available now!

Request Inspection


We understand that you need to get rid of the mold danger, not add to it. No task is as well little or as well huge as well as we supply our services to both residential and commercial clients, consisting of home owners, property owners, institutions, hotels: any kind of kind of home.


Request A Mold Inspection

Learn More >     Contact Us >

Mold Inspection Texas

Get Top Beneficial Results With Our Mold Inspection Services In Austin Texas

There are literally thousands of types of mold in the environment. The good news is that over the centuries, molds have helped produce some wonderful inventions such as penicillin, breads, cheese, and particular alcoholic beverages. The bad news is that molds reproduce by sending out spores. These spores activate and grow when they land on a moist spot. Mold inspection Austin Texas

The mold spreads and also spreads. Outside this is not necessarily a poor scenario because mold is component of the all-natural process of decay.

Mold when left unremediated, can create a strong stuffy odor, have a furry appearance, and be mushy in appearance. Not an attractive view.

Air Sampling - Mold inspection

The objective of air sampling is to establish the kind as well as amount of airborne pollutants existing. Air tasting is executed when the presence of mold is suspect, because of moldy smells and allergic reactions however can not be determined via the visual evaluation. Air sampling is performed on both the outdoor as well as interior air for a contrast to figure out where problems exist or come from. The indoor example is taken when the Air Conditioner or heating unit are in operation to make sure a effective as well as exact examination.

Tape/Swab Sampling - Mold inspection

Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.

Why hire us to eliminate the mold?

Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Texas  Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.

Hidden Mold

The concern of surprise mold generates visions of mold removal professionals shuffling around inside specialized rooms while destroying your house at significant expense to you. If you have actually discovered musty odors or water damage, maybe it is time to consult with a mold expert. However, for the huge bulk of homeowners that have actually not observed the signs and symptoms of mold development, now is the best time to begin looking.

The majority of are familiar with Stachybotrys, the "hazardous black mold", which prevails to water damaged gypsum wallboard. This mold organism calls for high dampness accessibility, referred to as water activity, to develop. Ideal growth is attained at.98 water activity, which is a lot of wetness. Huge black spots, powerful odor, as well as lots of water, generally make this mold difficult to miss. The genuine risk of covert mold is the ability for a small mold trouble to develop into a expensive as well as big one prior to being noticed. Wallpaper can help make that feasible.

Wallpaper is more than an ornamental wall covering. As a matter of fact, any big appeared thing or treatment added to a wall, such as bookshelves, paint or wallpaper, can alter the vapor and thermal efficiency of a wall surface. This understanding is especially vital for the boundary wall surfaces of the residence, yet ought to be a consideration for some indoor wall surfaces, also. There are various other aspects to think about, however generally; wetness relocations from warm areas to cooler areas. So, in the summer season, cozy moist air attempts to make its means indoors where it is cooler and also, when it comes to a shower room, warm wet air from bathing activities migrates to cooler locations. A well developed wall will slow down the progression of moisture via the wall and also yet permit it to travel through prior to trapping way too much dampness and experiencing psychrometric conditions that would certainly permit condensation. Numerous wallpaper kinds impede moisture movement at one of the most critical location, the coldest surface of the wall. The challenge likewise implements a higher water task in the underlying wallboard that brings about hidden mold development.
It's time to identify to what degree the mold has actually developed when you have actually uncovered that you have hidden mold. Figuring out the moisture source or psychrometric catalyst is vital in approximating the dimension of the damaged location. You might locate that the damage is tiny and also limited to an area around a leaking home window, a/c system or connected with a vent blowing chilly air directly on the area.

Mold Inspection Austin Texas

Mold and mildew Expert? Licensed Mold Inspectors Mold Inspection is made up of mold and mildew examiners accredited by the Texas Department of State Health Services to do the following solutions in Texas: Mold assessment Mold and mildew screening Mold removal Mold elimination Asbestos screening Asbestos reduction Austin home owners need not to worry any longer about mold problems in their houses. Catstrong makes sure top notch mold testing, inspection, and remediation services that will certainly make your home mold-free. Our competent specialists are additionally furnished with expertise and experience on boosting the air high quality which results to a much healthier as well as cleaner house.

FAQ | Mold Inspection

How much does mold inspection cost?
On average, mold inspection costs $300 to $400 for small to medium-sized houses (below 4,000 square feet). Above 4,000 square feet, the expense increases to the $700 to $900 range. These expenses are for inspection just and do not always consist of testing.

How do I know if my house has mold? What are the signs to look for?
You are experiencing allergic signs, such as stuffy head, headaches, scratchy throat, runny nose and not exactly sure why. You believe you see mold however are not absolutely sure it is mold. You smell a moldy smell but do not see any obvious mold. There have in fact been plumbing leaks or water concerns in your house or office. You want or require air screening after mold elimination has actually been done by you or a professional to check whether mold levels have in fact normalized. You are a purchaser or vendor in a real estate deal and also need proof whether airborne mold levels are not maintained.
You a property manager or tenant and need proof whether there is a mold problem. You are looking for a general assessment of your indoor air quality to make certain your family is breathing high quality clean air in your house.

Do I Really Need Professional Mold Testing & Removal?​
Yes, it is recommended.
Catstrong Mold Removal is a top mold inspection and remediation specialists. Whether you need mold inspection, mold remediation or water damage restoration, our expert local contractors are waiting for your call.

Contact • Mold Inspection

Are You Ready To Eliminate The Mold • Mold Inspection?

Connect with one of our team experts

Start Today!

Contact Us

Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible.

Call at (512) 931-3245


MOLD INSPECTION | AREAS WE COVER: 73301, 73344, 78610, 78613, 78617, 78641, 78651, 78652, 78653, 78660, 78701, 78702, 78703, 78704, 78705, 78708, 78709, 78710, 78711, 78712, 78713, 78714, 78715, 78716, 78717, 78718, 78719, 78720, 78721, 78722, 78723, 78724, 78725, 78726, 78727, 78728, 78729, 78730, 78731, 78732, 78733, 78734, 78735, 78736, 78737, 78738, 78739, 78741, 78742, 78744, 78745, 78746, 78747, 78748, 78749, 78750, 78751, 78752, 78753, 78754, 78755, 78756, 78757, 78758, 78759, 78760, 78761, 78762, 78763, 78764, 78765, 78766, 78767, 78768, 78769, 78772, 78773, 78774, 78778, 78779, 78780, 78781, 78783, 78785, 78786, 78788, 78789, 78798, 78799



Phone: (512) 931-3245

Mold Inspection and Mold Testing

Mold Inspection in Austin, Texas is a professional mold inspection, mold detection, and mold testing. We are the premier mold inspection and testing company in Austin and the best choice if you are looking for an unbiased home mold inspection or commercial mold inspection from an experienced company.
We do not perform mold remediation, so when you work with us there are no conflicts of interest.
Black mold removal Austin, black mold test Austin, clearance testing Austin, environmental consultant Austin, home mold test Austin, mildew remover Austin, mold abatement Austin, mold and mildew Remover Austin, mold cleaner Austin, mold cleanup, mold detector, mold in basement, mold inspection, mold killer Austin, mold mitigation, mold remediation, mold remediation cost Austin, mold removal companies, mold removal cost, mold specialist, mold testing, mold treatment, swab testing, mold inspection near me, mold inspection cost, mold inspection home, mold removal cost, asbestos testing, asbestos testing cost, water damage, water removal, water extraction Austin, water damage repair, microbial growth Austin, fungus Austin Texas

Proudly Servicing Texas Local Areas

Austin • Barton Creek • Bear Creek • Bee Cave • Brushy Creek • Buda • Cedar Park • Creedmoor • Driftwood • Garfield • Hays • Hornsby Bend • Hudson Bend • Hutto • Jollyville • Jonestown • Lago Vista • Lakeway • Leander • Lost Creek • Manchaca • Manor • Mountain City • Mustang Ridge • Pflugerville • Point Venture • Rollingwood • Round Rock • San Leanna • Shady Hollow • Sunset Valley • The Hills • Volente • Webberville • Wells Branch • West Lake Hills • Wyldwood

Mold Inspection Austin Texas | 73301
MOLD INSPECTION Mold Inspection Austin 30.30046 -97.75124
Mold Inspection Austin Texas keyword zip