A visual inspection is a preliminary step in recognizing mold problems as well as possible contamination problems. Throughout the procedure, water leaks, and moisture stains within the house will certainly be identified. A/c, heating systems, and also crawl areas will additionally get inspection. Aesthetic evaluation in combination with tape, air, and swab tasting will make sure the assessor will have the ability to identify the source of the contamination trouble and remediate it.

Contact Us »

If mold exists, the underlying cause of the water damage must be corrected.

Get an expert to inspect for mold - Available now!

Request Inspection


We understand that you need to get rid of the mold danger, not add to it. No task is also huge or as well tiny as well as we give our services to both industrial and household customers, consisting of home owners, landlords, colleges, hotels: any type of residential property.


Request A Mold Inspection

Learn More >     Contact Us >



There are literally thousands of types of mold in the environment. The good news is that over the centuries, molds have helped produce some wonderful inventions such as penicillin, breads, cheese, and particular alcoholic beverages. The bad news is that molds reproduce by sending out spores. These spores activate and grow when they land on a moist spot. Mold inspection Hays Texas

This mold then expands more spores and so forth. The mold spreads and spreads. Because mold is part of the natural procedure of decay, outside this is not necessarily a poor circumstance. It is part of the factor that leaves that missed out on the autumn raking will have degraded into soil by spring. However, when mold horns in a house as a result of an existing wetness issue, it can get unsightly.

Mold when left unremediated, can create a solid mildewy smell, have a fuzzy look, and be mushy in appearance. Not an attractive view.

Air Sampling - Mold inspection

Air tasting is performed when the existence of mold is suspicious, due to moldy odors and allergies yet can not be identified through the aesthetic assessment. Air sampling is carried out on both the outdoor and indoor air for a comparison to determine where issues exist or stem.

Tape/Swab Sampling - Mold inspection

Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.

Why hire us to eliminate the mold?

Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Texas  Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.

Hidden Mold

The worry of concealed mold triggers visions of mold removal specialists traipsing around inside specialized enclosures while destroying your home at significant expense to you. Perhaps it is time to consult with a mold expert if you have actually discovered moldy smells or water damages. Nevertheless, for the huge majority of house owners that have not noticed the symptoms of mold development, currently is the ideal time to begin looking.

A lot of are familiar with Stachybotrys, the "poisonous black mold", which is typical to water harmed plaster wallboard. Big black patches, effective odor, and also lots of water, typically make this mold tough to miss out on. The actual danger of surprise mold is the ability for a small mold problem to develop into a large as well as expensive one before being observed.

Wallpaper is greater than an ornamental wall surface covering. Actually, any type of large appeared product or therapy added to a wall, such as shelfs, paint or wallpaper, can modify the vapor and thermal efficiency of a wall. This knowledge is especially important for the perimeter walls of the residence, but must be a consideration for some indoor wall surfaces, also. There are various other elements to take into consideration, but in general; wetness steps from cozy areas to cooler areas. So, in the summertime, cozy damp air attempts to make its way inside your home where it is cooler and also, in the case of a shower room, cozy wet air from bathing activities moves to cooler locations. A well designed wall surface will reduce the progression of wetness via the wall and also yet allow it to go through before capturing too much dampness and also encountering psychrometric problems that would allow condensation. Many wallpaper kinds impede moisture migration at one of the most essential area, the coldest surface area of the wall. The obstacle also makes possible a higher water activity in the underlying wallboard that leads to concealed mold development.
As soon as you have actually discovered that you have concealed mold, it's time to figure out to what degree the mold has established. Determining the dampness resource or psychrometric driver is vital in approximating the size of the damaged area. You might find that the damage is tiny and also minimal to a location around a dripping window, a/c system or connected with an air vent blowing chilly air straight on the area.

Contact • Mold Inspection

Are You Ready To Eliminate The Mold • Mold inspection?

Connect with one of our team experts

Start Today!

Contact Us

Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible. To ensure that we could much better aid you, please note that areas noted with an asterisk needs to be filled out.

Call at (512) 931-3245


Phone: (512) 931-3245

Proudly Servicing Texas Local Areas

Austin • Barton Creek • Bear Creek • Bee Cave • Brushy Creek • Buda • Cedar Park • Creedmoor • Driftwood • Garfield • Hays • Hornsby Bend • Hudson Bend • Hutto • Jollyville • Jonestown • Lago Vista • Lakeway • Leander • Lost Creek • Manchaca • Manor • Mountain City • Mustang Ridge • Pflugerville • Point Venture • Rollingwood • Round Rock • San Leanna • Shady Hollow • Sunset Valley • The Hills • Volente • Webberville • Wells Branch • West Lake Hills • Wyldwood