A visual inspection is a first action in recognizing mold issues as well as possible contamination problems. Visual examination in combination with swab, tape, as well as air sampling will certainly make certain the assessor will be able to identify the resource of the contamination issue and remediate it.

Contact Us »

If mold exists, the underlying cause of the water damage must be corrected.

Get an expert to inspect for mold - Available now!

Request Inspection


We understand that you need to get rid of the mold danger, not add to it. No work is as well large or too little as well as we offer our solutions to both commercial and also household customers, consisting of homeowners, property owners, institutions, hotels: any type of kind of property.


Request A Mold Inspection

Learn More >     Contact Us >



There are literally thousands of types of mold in the environment. The good news is that over the centuries, molds have helped produce some wonderful inventions such as penicillin, breads, cheese, and particular alcoholic beverages. The bad news is that molds reproduce by sending out spores. These spores activate and grow when they land on a moist spot. Mold inspection Taylor Texas

The mold spreads as well as spreads. Outside this is not always a negative circumstance because mold is part of the natural process of degeneration.

Mold when left unremediated, can generate a solid moldy smell, have a hairy appearance, as well as be mushy in texture. Not an attractive sight.

Air Sampling - Mold inspection

The objective of air sampling is to figure out the kind as well as amount of air-borne impurities present. Air tasting is done when the existence of mold is suspicious, as a result of musty odors as well as allergies however can not be established with the visual inspection. Air sampling is performed on both the interior as well as outdoor air for a comparison to figure out where problems exist or stem. When the AC or home heating systems are in operation to make sure a exact and also effective test, the indoor example is taken.

Tape/Swab Sampling - Mold inspection

Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.

Why hire us to eliminate the mold?

Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Texas  Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.

Hidden Mold

The worry of surprise mold triggers visions of mold removal professionals shuffling around inside specialized enclosures while demolishing your home at remarkable expense to you. If you have observed moldy smells or water damage, probably it is time to seek advice from a mold professional. However, for the large bulk of homeowners that have actually not observed the signs of mold development, now is the best time to start looking.

The majority of are familiar with Stachybotrys, the "hazardous black mold", which is common to water damaged gypsum wallboard. This mold organism needs high wetness schedule, referred to as water activity, to create. Ideal growth is attained at.98 water activity, which is a lot of wetness. Large black patches, effective smell, as well as lots of water, typically make this mold hard to miss. The genuine danger of hidden mold is the capacity for a small mold problem to become a costly and large one before being noticed. Wallpaper can help make that possible.

Any big emerged thing or therapy included to a wall surface, such as bookshelves, paint or wallpaper, can alter the vapor and thermal efficiency of a wall. A well designed wall will slow down the development of dampness through the wall surface and yet permit it to pass through prior to trapping as well much dampness and also coming across psychrometric conditions that would certainly permit condensation. The obstacle likewise makes feasible a greater water task in the underlying wallboard that leads to hidden mold development.
It's time to determine to what degree the mold has established as soon as you have discovered that you have hidden mold. Establishing the moisture resource or psychrometric stimulant is extremely important in estimating the size of the broken area. You might find that the damages is restricted as well as small to an area around a dripping window, a/c device or connected with a vent blowing chilly air straight on the area.

Contact • Mold Inspection

Are You Ready To Eliminate The Mold • Mold inspection?

Connect with one of our team experts

Start Today!

Contact Us

Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible. To ensure that we could much better aid you, please note that areas noted with an asterisk needs to be filled out.

Call at (512) 931-3245


Phone: (512) 931-3245

Proudly Servicing Texas Local Areas

Austin • Barton Creek • Bear Creek • Bee Cave • Brushy Creek • Buda • Cedar Park • Creedmoor • Driftwood • Garfield • Hays • Hornsby Bend • Hudson Bend • Hutto • Jollyville • Jonestown • Lago Vista • Lakeway • Leander • Lost Creek • Manchaca • Manor • Mountain City • Mustang Ridge • Pflugerville • Point Venture • Rollingwood • Round Rock • San Leanna • Shady Hollow • Sunset Valley • The Hills • Volente • Webberville • Wells Branch • West Lake Hills • Wyldwood