An aesthetic inspection is a preliminary step in determining mold problems and possible contamination issues. Visual examination in combination with tape, air, and also swab tasting will guarantee the inspector will be able to identify the source of the contamination problem and remediate it.

Contact Us »

If mold exists, the underlying cause of the water damage must be corrected.

Get an expert to inspect for mold - Available now!

Request Inspection


We understand that you need to get rid of the mold danger, not add to it. No task is too little or too large and we supply our solutions to both residential and also commercial clients, including property owners, property owners, schools, hotels: any type of sort of home.


Request A Mold Testing

Learn More >     Contact Us >

Mold Testing Texas

Get Top Beneficial Results With Our Mold Testing Services In Dripping Springs Texas

There are literally thousands of types of mold in the environment. The good news is that over the centuries, molds have helped produce some wonderful inventions such as penicillin, breads, cheese, and particular alcoholic beverages. The bad news is that molds reproduce by sending out spores. These spores activate and grow when they land on a moist spot. Mold testing Dripping springs Texas

This mold then expands more spores and more. The mold spreads and spreads. Outside this is not always a negative scenario because mold is part of the all-natural process of degeneration. It becomes part of the reason that leaves that missed out on the autumn raking will have weakened right into soil by springtime. Nevertheless, when mold horns in a house as a result of an existing dampness issue, it can get awful.

Mold when left unremediated, can produce a solid moldy odor, have a fuzzy appearance, and be mushy in texture. Not an eye-catching view.

Air Sampling - Mold testing

Air sampling is executed when the visibility of mold is suspect, due to stuffy odors and allergies however can not be determined with the aesthetic inspection. Air sampling is performed on both the indoor as well as exterior air for a contrast to establish where issues exist or stem.

Tape/Swab Sampling - Mold testing

Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.

Why hire us to eliminate the mold?

Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Texas  Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.

Hidden Mold

The anxiety of hidden mold triggers visions of mold remediation professionals shuffling around inside specialized units while destroying your residence at remarkable expense to you. If you have actually seen moldy odors or water damages, possibly it is time to consult with a mold expert. However, for the big majority of house owners who have actually not noticed the signs of mold growth, currently is the perfect time to begin looking.

Most recognize with Stachybotrys, the "poisonous black mold", which is common to water damaged gypsum wallboard. This mold organism requires high moisture availability, called water activity, to develop. Ideal development is accomplished at.98 water task, which is a lot of dampness. Huge black spots, effective odor, as well as lots of water, typically make this mold hard to miss out on. The genuine danger of hidden mold is the capacity for a little mold problem to become a big as well as pricey one prior to being observed. Wallpaper can help make that possible.

Any big appeared thing or treatment added to a wall surface, such as shelfs, paint or wallpaper, can alter the vapor as well as thermal performance of a wall surface. A well made wall surface will certainly slow down the development of wetness with the wall surface and also yet permit it to pass through prior to trapping too much wetness and also experiencing psychrometric conditions that would allow condensation. The obstacle likewise makes feasible a higher water task in the underlying wallboard that leads to concealed mold growth.
When you have discovered that you have concealed mold, it's time to identify to what level the mold has actually established. Establishing the moisture source or psychrometric driver is extremely important in estimating the dimension of the damaged location. You might discover that the damage is tiny and limited to an area around a leaking home window, air conditioning device or connected with a vent blowing cold air straight on the area.

Mold Testing Dripping Springs Texas

Our Mold Testing Process Each of our specialists are qualified as well as experienced, so at every single project that we accomplish, we can ensure specific and also thorough mold and mildew screening and investigations which will absolutely assist you fix any kind of concerns you have actually been experiencing in your property or business residential or commercial property. Our Mold Inspection specialists have hands-on sensible experience along with extensive education as well as training. Our qualified provider have the education and learning and also know-how to: Pinpoint wetness resources Assess mold and mildew growth Constantly maintain the damage included inside the smallest area feasible Physically remediate the impurities Aid avoid additional mold and mildew growth from occurring Recommend or perform the correct treatments for recovering your house or business to a pre-loss damages state

FAQ | Mold Testing

How much does mold inspection cost?
On average, mold inspection costs $300 to $400 for small to medium-sized houses (below 4,000 square feet). Above 4,000 square feet, the expense increases to the $700 to $900 range. These expenses are for inspection just and do not always consist of testing.

How do I know if my house has mold? What are the signs to look for?
You are experiencing allergic signs, such as stuffy head, headaches, scratchy throat, runny nose and not exactly sure why. You believe you see mold however are not absolutely sure it is mold. You smell a moldy smell but do not see any obvious mold. There have actually been plumbing leakages or water concerns in your house or office. You need or want air screening after mold elimination has been done by you or an expert to examine whether mold degrees have really normalized. You are a buyer or vendor in a realty deal and require proof whether air-borne mold levels are not supported.
You a property manager or tenant and need proof whether there is a mold problem. You are looking for a general assessment of your indoor air quality to make certain your family is breathing high quality clean air in your house.

Do I Really Need Professional Mold Testing & Removal?​
Yes, it is recommended.
Catstrong Mold Removal is a top mold inspection and remediation specialists. Whether you need mold inspection, mold remediation or water damage restoration, our expert local contractors are waiting for your call.

Contact • Mold Inspection

Are You Ready To Eliminate The Mold • Mold Testing?

Connect with one of our team experts

Start Today!

Contact Us

Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible.

Call at (512) 931-3245


MOLD TESTING | AREAS WE COVER: 78619, 78620, 78737



Phone: (512) 931-3245

Mold Inspection and Mold Testing

Mold Inspection in Dripping Springs, Texas is a professional mold inspection, mold detection, and mold testing. We are the premier mold inspection and testing company in Dripping Springs and the best choice if you are looking for an unbiased home mold inspection or commercial mold inspection from an experienced company.
We do not perform mold remediation, so when you work with us there are no conflicts of interest.
Black mold removal Dripping Springs, black mold test Dripping Springs, clearance testing Dripping Springs, environmental consultant Dripping Springs, home mold test Dripping Springs, mildew remover Dripping Springs, mold abatement Dripping Springs, mold and mildew Remover Dripping Springs, mold cleaner Dripping Springs, mold cleanup, mold detector, mold in basement, mold inspection, mold killer Dripping Springs, mold mitigation, mold remediation, mold remediation cost Dripping Springs, mold removal companies, mold removal cost, mold specialist, mold testing, mold treatment, swab testing, mold inspection near me, mold inspection cost, mold inspection home, mold removal cost, asbestos testing, asbestos testing cost, water damage, water removal, water extraction Dripping Springs, water damage repair, microbial growth Dripping Springs, fungus Dripping Springs Texas

Proudly Servicing Texas Local Areas

Austin • Barton Creek • Bear Creek • Bee Cave • Brushy Creek • Buda • Cedar Park • Creedmoor • Driftwood • Garfield • Hays • Hornsby Bend • Hudson Bend • Hutto • Jollyville • Jonestown • Lago Vista • Lakeway • Leander • Lost Creek • Manchaca • Manor • Mountain City • Mustang Ridge • Pflugerville • Point Venture • Rollingwood • Round Rock • San Leanna • Shady Hollow • Sunset Valley • The Hills • Volente • Webberville • Wells Branch • West Lake Hills • Wyldwood

Mold Testing Dripping Springs Texas | 78619
MOLD TESTING Mold Testing Dripping Springs 30.19021 -98.08668
Mold Testing Dripping Springs Texas keyword zip