An aesthetic evaluation is a preliminary action in determining mold problems as well as feasible contamination concerns. During the procedure, water leakages, and also wetness discolorations within your home will certainly be identified. A/c, heater, and crawl rooms will certainly also obtain inspection. Visual assessment in mix with swab, air, and tape tasting will ensure the inspector will be able to determine the source of the contamination issue as well as remediate it.

Contact Us »

If mold exists, the underlying cause of the water damage must be corrected.

Get an expert to inspect for mold - Available now!

Request Inspection


We understand that you need to get rid of the mold danger, not add to it. No job is as well little or as well huge and we offer our solutions to both residential and commercial consumers, including house owners, property managers, schools, hotels: any type of kind of residential or commercial property.


Request A Mold Testing

Learn More >     Contact Us >

Mold Testing Texas

Get Top Beneficial Results With Our Mold Testing Services In Jollyville Texas

There are literally thousands of types of mold in the environment. The good news is that over the centuries, molds have helped produce some wonderful inventions such as penicillin, breads, cheese, and particular alcoholic beverages. The bad news is that molds reproduce by sending out spores. These spores activate and grow when they land on a moist spot. Mold testing Jollyville Texas

This mold after that expands more spores and more. The mold spreads as well as spreads. Outside this is not always a bad situation since mold belongs to the natural procedure of decay. It belongs to the reason that leaves that missed out on the autumn raking will certainly have worn away right into dirt by spring. However, when mold horns in a house as a result of an existing dampness trouble, it can get awful.

Mold when left unremediated, can produce a strong mildewy smell, have a furry appearance, and be mushy in appearance. Not an eye-catching sight.

Air Sampling - Mold testing

Air sampling is done when the presence of mold is suspect, due to moldy odors and also allergic reactions yet can not be identified with the aesthetic assessment. Air tasting is done on both the outside and also interior air for a comparison to determine where issues exist or come from.

Tape/Swab Sampling - Mold testing

Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.

Why hire us to eliminate the mold?

Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Texas  Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.

Hidden Mold

The anxiety of concealed mold generates visions of mold removal specialists shuffling around inside specialized rooms while demolishing your residence at incredible cost to you. If you have actually noticed moldy smells or water damage, probably it is time to speak with a mold expert. Nonetheless, for the large majority of home owners who have actually not seen the signs and symptoms of mold development, now is the excellent time to start looking.

A lot of recognize with Stachybotrys, the "poisonous black mold", which prevails to water damaged plaster wallboard. This mold microorganism requires high moisture availability, referred to as water task, to create. Ideal development is attained at.98 water task, which is a lot of moisture. Huge black patches, powerful smell, and also great deals of water, typically make this mold difficult to miss out on. The genuine risk of hidden mold is the capacity for a small mold problem to turn into a big and also expensive one before being observed. Wallpaper can aid make that feasible.

Wallpaper is greater than a decorative wall covering. In fact, any huge emerged thing or treatment added to a wall surface, such as bookshelves, paint or wallpaper, can alter the vapor and also thermal efficiency of a wall surface. This knowledge is particularly crucial for the perimeter walls of the house, but need to be a consideration for some interior walls, too. There are other aspects to consider, but in general; moisture actions from cozy areas to cooler locations. So, in the summer, cozy moist air tries to make its method indoors where it is cooler and, when it comes to a shower room, warm damp air from bathing activities migrates to cooler areas. A well developed wall surface will certainly reduce the progression of wetness with the wall as well as yet permit it to go through prior to capturing excessive moisture and encountering psychrometric conditions that would allow condensation. Numerous wallpaper kinds hinder moisture migration at one of the most essential place, the chilliest surface area of the wall. The obstacle additionally makes possible a greater water activity in the underlying wallboard that brings about concealed mold growth.
Once you have actually uncovered that you have actually concealed mold, it's time to determine to what extent the mold has actually created. Identifying the moisture source or psychrometric stimulant is critical in estimating the size of the broken area. You may find that the damage is little and also limited to a location around a leaking window, cooling unit or related to a vent blowing cool air directly on the location.

Mold Testing Jollyville Texas

Our Mold Testing Process Every one of our specialists are qualified and also experienced, so at every project that we accomplish, we can guarantee comprehensive and accurate mold testing as well as examinations which will definitely help you fix any type of problems you have been encountering in your property or business building. Our Mold Inspection specialists have hands-on sensible experience in addition to substantial education and learning as well as training. Our licensed service companies have the education and learning and also knowledge to: Pinpoint wetness resources Assess mold and mildew growth Constantly maintain the damage consisted of inside the tiniest location feasible Physically remediate the contaminants Aid prevent more mold development from taking place Suggest or perform the correct treatments for recovering your house or business to a pre-loss damages state

FAQ | Mold Testing

How much does mold inspection cost?
On average, mold inspection costs $300 to $400 for small to medium-sized houses (below 4,000 square feet). Above 4,000 square feet, the expense increases to the $700 to $900 range. These expenses are for inspection just and do not always consist of testing.

How do I know if my house has mold? What are the signs to look for?
You are experiencing allergic signs, such as stuffy head, headaches, scratchy throat, runny nose and not exactly sure why. You believe you see mold however are not absolutely sure it is mold. You smell a moldy smell but do not see any obvious mold. There have actually been plumbing leaks or water issues in your house or workplace. You want or require air testing after mold elimination has actually been done by you or an expert to examine whether mold degrees have actually normalized. You are a purchaser or seller in a property offer and need proof whether airborne mold levels are not maintained.
You a property manager or tenant and need proof whether there is a mold problem. You are looking for a general assessment of your indoor air quality to make certain your family is breathing high quality clean air in your house.

Do I Really Need A Professional For Mold Testing & Removal?​
Yes, it is recommended.
Catstrong Mold Removal is a top mold inspection and remediation specialists. Whether you need mold inspection, mold remediation or water damage restoration, our expert local contractors are waiting for your call.
Mold Cleanup and removal methods
The purpose of cleanup is to eliminate mold and remove contaminated materials. Killing mold with a biocide is insufficient, since chemicals and proteins causing reactions in humans remain in dead mold. The following methods are used.
  • Evaluation: Before remediation, the area is assessed to ensure safety, clean up the entire moldy area, and properly approach the mold. The EPA provides the following instructions:
  • HVAC cleaning: Should be done by a trained professional.
  • Protective clothing: Includes a half- or full-face respirator mask. Goggles with a half-face respirator mask prevent mold spores from reaching the mucous membranes of the eyes. Disposable hazmat coveralls are available to keep out particles down to one micrometer, and protective suits keep mold spores from entering skin cuts. Gloves are made of rubber, nitrile, polyurethane, or neoprene.
  • Dry brushing or agitation device: Wire brushing or sanding is used when microbial growth can be seen on solid wood surfaces such as framing or underlayment (the subfloor).
  • Dry-ice blasting: Removes mold from wood and cement; however, this process may spray mold and its byproducts into surrounding air.
  • Wet vacuum: Wet vacuuming is used on wet materials, and this method is one of those approved by the EPA.
  • Damp wipe: Removal of mold from non-porous surfaces by wiping or scrubbing with water and a detergent and drying quickly.
  • HEPA (high-efficiency particulate air) vacuum: Used in remediation areas after materials have been dried and contaminated materials removed; collected debris and dust is stored to prevent debris release.
  • Debris disposal: Sealed in the remediation area, debris is usually discarded with ordinary construction waste. Mold Removal Methods


What is mold?

A mold or mould is a fungus that grows in the form of multicellular filaments called hyphae. In contrast, fungi that can adopt a single-celled growth habit are called yeasts. MOLD

Mold Testing

Broadly speaking, most mold testing involves taking a sample of either the air or a surface. Essentially, a mold inspector "tests" the air or surface to find out what kind of mold exists and/or if the mold found is able to grow in the area tested.

Contact • Mold Inspection
mold testing Jollyville Mold Testing Jollyville Texas 30.4427 -97.775 Mold Testing
Jollyville Texas

Jollyville is a census-designated place in Travis and Williamson counties in Texas. It is a neighborhood in north Austin. The population was 16,151 at the 2010 census. Jollyville, TX

Are You Ready To Eliminate The Mold • Mold Testing?

Connect with one of our team experts

Start Today!

Contact Us

Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible.


Call at (855) 719-1222  





Phone: (512) 931-3245

Mold Inspection and Mold Testing

Mold Inspection in Jollyville, Texas is a professional mold inspection, mold detection, and mold testing. We are the premier mold inspection and testing company in Jollyville and the best choice if you are looking for an unbiased home mold inspection or commercial mold inspection from an experienced company.
We do not perform mold remediation, so when you work with us there are no conflicts of interest.
Black mold removal Jollyville, black mold test Jollyville, clearance testing Jollyville, environmental consultant Jollyville, home mold test Jollyville, mildew remover Jollyville, mold abatement Jollyville, mold and mildew Remover Jollyville, mold cleaner Jollyville, mold cleanup, mold detector, mold in basement, mold inspection, mold killer Jollyville, mold mitigation, mold remediation, mold remediation cost Jollyville, mold removal companies, mold removal cost, mold specialist, mold testing, mold treatment, swab testing, mold inspection near me, mold inspection cost, mold inspection home, mold removal cost, asbestos testing, asbestos testing cost, water damage, water removal, water extraction Jollyville, water damage repair, microbial growth Jollyville, fungus Jollyville Texas

Proudly Servicing Texas Local Areas

Austin • Barton Creek • Bear Creek • Bee Cave • Brushy Creek • Buda • Cedar Park • Creedmoor • Driftwood • Garfield • Hays • Hornsby Bend • Hudson Bend • Hutto • Jollyville • Jonestown • Lago Vista • Lakeway • Leander • Lost Creek • Manchaca • Manor • Mountain City • Mustang Ridge • Pflugerville • Point Venture • Rollingwood • Round Rock • San Leanna • Shady Hollow • Sunset Valley • The Hills • Volente • Webberville • Wells Branch • West Lake Hills • Wyldwood

Mold Testing Jollyville Texas | 78729
MOLD TESTING Mold Testing Jollyville 30.4427 -97.775
Mold Testing Jollyville Texas keyword zip