A visual inspection is an initial step in identifying mold problems and possible contamination issues. During the process, water leaks, and moisture stains within the house will be identified. Air conditioning, heating systems, and crawl spaces will also receive inspection. Visual inspection in combination with air, tape, and swab sampling will ensure the inspector will be able to determine the source of the contamination problem and remediate it.
We understand that you need to get rid of the mold danger, not add to it. No job is too big or too small and we provide our services to both residential and commercial customers, including homeowners, landlords, schools, hotels: any type of property.
|Austin||Barton Creek||Bear Creek||Bee Cave||Briarcliff||Brushy Creek|
|Buda||Cedar Park||Coupland||Creedmoor||Driftwood||Dripping Springs|
|Hudson Bend||Hutto||Jollyville||Jonestown||Kyle||Lago Vista|
|Lakeway||Leander||Liberty Hill||Lockhart||Lost Creek||Manchaca|
|Manor||Mountain City||Mustang Ridge||Niederwald||Pflugerville||Point Venture|
|Rollingwood||Round Rock||San Leanna||San Marcos||Serenada||Shady Hollow|
|Sunset Valley||Taylor||The Hills||Uhland||Volente||Webberville|
|Weir||Wells Branch||West Lake Hills||Wimberley||Woodcreek||Wyldwood|
|Brownsville||Carrollton||College Station||Corpus Christi||Dallas||Denton|
|Edinburg||El Paso||Fort Worth||Frisco||Garland||Grand Prairie|
|Pasadena||Pearland||Plano||Richardson||Round Rock||San Angelo|
|San Antonio||Sugar Land||Tyler||Waco||Wichita Falls|
There are essentially hundreds of types of mold in the setting. Fortunately is that over the centuries, mold and mildews have actually assisted create some wonderful creations such as penicillin, breads, cheese, and certain alcohols. The bad news is that molds duplicate by sending out spores. These spores grow as well as trigger when they land on a damp place.
Outside this is not always a poor situation since mold is component of the natural process of degeneration. When mold intrudes right into a home due to an existing dampness problem, it can get awful.
Mold when left unremediated, can generate a solid musty odor, have a hairy appearance, and be mushy in texture. Not an eye-catching sight.
Air Sampling - Mold Inspection
The purpose of air sampling is to determine the type and amount of airborne contaminants present. Air sampling is performed when the presence of mold is suspect, due to musty odors and allergies but cannot be determined through the visual inspection. Air sampling is performed on both the indoor and outdoor air for a comparison to determine where problems exist or originate. The indoor sample is taken when the AC or heating systems are in operation to ensure an effective and accurate test.
Tape/Swab Sampling - Mold Inspection
Tape/swab samples are typically collected from visually moldy areas of an interior area using a sterile swab. This type of test is done to determine the type of mold infestation.
Mold or mould, also sometimes referred to as mildew, is a fungal growth that develops on wet materials. Mold is a natural part of the environment and plays an important part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided.
Mold inspection is, for the most part, a visual inspection of a house. ... A typical mold inspection involves the inspector talking to the property owner about any areas where they have seen mold, or where there have been moisture problems or water damage in the past.
The purpose of cleanup is to eliminate mold and remove contaminated materials. Killing mold with a biocide is insufficient, since chemicals and proteins causing reactions in humans remain in dead mold. The following methods are used.
Thank you for your interest in Catstrong LLC. Our Texas Mold inspection, testing, and removal experts will certainly reply to your demand as swiftly as feasible. To ensure that we could much better aid you, please note that areas noted with an asterisk needs to be filled out.
HOME >> TEXAS >> MOLD REMEDIATION
Call at (512) 931-3245
Phone: (512) 931-3245